Detailed Product Description

Features:
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like
used for example by: 
- - Volkswagen 
- - Audi 
- - Skoda
- - Seat

Reference data: 
1. This cable can not work if your car uses a protocol/bus system like VPW, PWM or
CAN-bus
2. Terminal K = bus of communication 
3. Terminal L = ignition for waking up car computing system (ECU: engine control
unit) 
4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5. This K/L diagnostic interface and cables work on ISO/KWP (Key Word Protocol) launched
after 1996 only 
6. Supported also ISO9141 protocol 
7. The cables may work with some versions of the Carsoft, but Carsoft used a lot
of different interfaces during the different versions and also had some custom interfaces
8. Product running as virtual comport, like many products it uses a USB to RS232
converter chip. But under special circumstances this can give some problems regarding
timing especially on the handshake lines